WA Quick Help
⚡ QUICK WHATSAPP ESTIMATE
Prestige Paint

A Painter Did a Bad Job: What to Do Next

There is a particular kind of disappointment that comes from walking into a room you have paid to have painted and seeing it is wrong: the same patchy wall, the edges that are not straight, the colour that does not match the sample, or the paint that has started to blister within a month.

The instinct is either to argue immediately or to give up and repaint it yourself. Neither is usually the right first move. What matters is establishing what actually went wrong, because workmanship, product and the wall itself need three completely different responses.

First: is it the paint, the painter, or the wall?

Look at the pattern of the failure. It usually tells you which of the three you are dealing with.

  • Patchy coverage, visible roller or brush marks, uneven edges, drips: workmanship. The paint is probably fine; it was applied badly
  • Blisters, flaking, peeling in sheets: almost always preparation — dust, grease or damp under the film. Still workmanship, but a specific failure
  • Colour that does not match across walls, or a sticky, soft finish that never hardens: possibly the product was thinned, old, or mixed with another batch
  • Stains returning, mould in the same corner, cracks reopening: the wall was the problem and painting over it never had a chance

That diagnosis decides everything that follows. If a wall was damp, no amount of redoing the paint will fix it, and blaming the painter for a building problem is a waste of a relationship.

Record it properly

Before any conversation, take photographs. Not one wide shot of the room, but close images of each defect with something for scale, in daylight rather than under a bulb.

Write a simple list: room, wall, what is wrong, and where. If you have the original quote or the tin, keep both. A claim is much easier to settle with a photograph and a spec than with a description.

Do this before you touch anything. Once a wall is repainted, the evidence is gone.

Give the painter the chance to see it

Most reputable painters will come back and look. Show them the list, not the anger. A professional response to a snag list is one of the clearest signals of who you are dealing with.

Be specific about what you want fixed rather than asking for “the whole job redone”. A short, written snag list is easier to act on and harder to argue with than a general complaint.

If they do not respond, or respond badly, that is information too, and it is the point at which you stop relying on goodwill.

What is reasonable to ask for

The standard is the specification, not perfection. If the quote said two coats of a named product over a prepared surface, then patchy coverage after two coats is a failure and redoing it is reasonable.

What is not reasonable is asking for a full repaint because one corner has a brush mark, or refusing to allow the same painter to correct their own work, which is normally the fastest route to a fix.

Where the fault is preparation — dust under the film, paint over grease — a coat on top will not fix it. The failing area has to be taken back to a sound surface and redone, and that is a bigger conversation than a touch-up.

When the wall is the problem

If the failure is damp, efflorescence or a wall that was never sound, the honest answer is that repainting is not the fix. The plaster and the water have to be dealt with first, and then the wall painted.

That is not a defect in the painter’s work and it should not be treated as one. It is also worth saying plainly: a painter who told you the wall was damp before starting did you a favour, even if the job then cost more.

The remedies, cheapest first

  1. Touch-up for isolated marks, done with the original product
  2. Local redo of a wall or a section, back to a prepared surface
  3. Full recoating of the room where coverage is the problem
  4. Stripping back where the film has failed or preparation was skipped

Ask which one is being proposed and why. A painter who jumps straight to a full repaint may be padding; one who insists a touch-up will do when the whole wall is patchy is not being straight with you.

Getting it right the second time

If you are starting again with someone else, write the specification down before work starts: product by name, number of coats, preparation included, and what happens if a wall turns out worse than expected. Agree payment in stages, with a final payment after you have walked the job in daylight.

That single page prevents most of what went wrong the first time. Our guide to hiring painters covers what to ask before money changes hands.

Working out what it will take to fix

Tell us what went wrong and send photographs of the affected walls, and we will tell you whether it is a recoat, a local repair or a preparation failure. Call +234 802 562 5333 or message us on WhatsApp.