A good wooden chair or wardrobe outlives three sets of soft furnishings. What dates it is usually the finish, not the timber. Repainting furniture is one of the few jobs where a modest amount of work genuinely rescues something worth keeping.
It is also one of the jobs that fails most often, because furniture takes far more physical abuse than a wall: hands, keys, shoes, hot cups, spills, and constant movement. The preparation standard is higher and the film has to be harder.
What can be painted, and what cannot
Solid wood is straightforward. Sand it, prime it, paint it.
MDF and particleboard paint well, but the cut edges and any exposed core need sealing first, or they drink paint and stay rough however many coats you apply.
Veneer can be painted if the veneer is sound. If it is lifting or chipped, painting will not hide it; the edges will show as ridges under a film.
Laminate and melamine are the difficult ones. Paint struggles to grip a smooth, non-porous surface, and the joints between laminate and its substrate move. It can be done with heavy abrasion and a bonding primer, but it is not a beginner’s job, and the failure mode is sheets peeling off.
Metal frames and legs are a separate job: rust removal, metal primer, then gloss.
The enemy is polish, not dirt
Furniture polish, wax and silicone sprays leave a film that paint will not bond to, and it is invisible. A chair that has been polished weekly for ten years is a chair covered in a release agent.
Before anything else, degrease every surface with a strong cleaner, working the parts that hands touch twice. Rinse and dry fully. If water beads on the surface, there is still polish on it.
Preparation in order
- Take it apart where it comes apart: drawers out, handles and hinges off, doors removed
- Degrease and let it dry completely
- Sand to a key. You are not trying to remove the old finish, just to dull it so the new coat grips
- Repair loose joints and fill dents, old screw holes and chips
- Sand the filler flush and dust off thoroughly
- Prime, then paint
Skip step one and you will paint around handles, which always looks like what it is. Skip step five and the film will fail on the dust.
Choosing the finish
Prestige Premium Plus Gloss gives the hardest film and the easiest surface to wipe, which matters on tables, chair arms and anything children use. It also shows every dent and brush mark, so it rewards careful preparation.
Prestige Satin Finish is the modern choice for wardrobes, shelving and bedroom furniture: durable enough for daily handling, low enough sheen to hide the imperfections of an older piece.
What not to use: ordinary matt emulsion. It marks, it cannot be scrubbed, and on furniture it fails within months at the edges.
Applying it
Thin coats, two or three, rather than one heavy one. Furniture has edges, mouldings and small surfaces everywhere, and a thick coat sags off every one of them.
A brush for detail and edges, a small foam roller for flat panels, and a brush again to lay off the texture the roller leaves. Spraying gives the best result and needs the piece dismantled, dust-free space and proper masking; in an occupied home it is usually impractical.
Work flat wherever possible. A door or a drawer front painted standing up will run.
Curing takes longer than drying
Paint on furniture feels dry in hours and is not hard for days. A chair used the same evening will mark at the arms and the seat edge, and those marks do not come out.
Leave pieces a full week before heavy use, and longer for a table surface. Do not put anything on a painted shelf for several days, and do not stack painted items against each other while they cure.
When it is not worth doing
Painting rescues good bones, not broken ones. Walk away, or replace, if:
- The joints are loose in a way that glue will not fix
- The piece is veneered and the veneer is lifting across large areas
- It is laminate and the intent is a long-term finish, not a stopgap
- It is a piece with real antique value, where painting destroys the value rather than adding to it
For a wardrobe or a set of shelves, painting is nearly always worth it. For a dining table that gets used daily, weigh the curing time against buying new.
Planning a batch
If you are doing several pieces, do them together and give them one drying space. Tell us what the furniture is made of, how many pieces, and what finish is on them now, and we will tell you what primer and topcoat the job needs and roughly how much. Call +234 802 562 5333 or message us on WhatsApp.