An exterior wall in Nigeria takes more punishment in one year than an interior wall takes in ten. Direct sun for most of the day, driving rain for four or five months, harmattan dust in between, and constant temperature movement that opens and closes cracks. The coating on that wall is the only thing standing between the weather and the plaster.
Most exterior paint failures are not caused by a bad product. They are caused by the wrong product, or by the right product on an unprepared wall. This guide covers both, and what the job should cost in materials and days.
Why exterior paint fails
Five things destroy an exterior coating, and they arrive together:
- Ultraviolet light breaks down the binder in the paint, so the surface chalks and rubs off on your hand. A wall that has gone chalky cannot simply be repainted; the chalk has to be removed first.
- Driving rain finds every hairline crack. Water enters the wall, sits behind the film, and pushes the paint off in sheets when it tries to escape.
- Heat movement opens and closes cracks between the dry season and the rains. Dark walls move more than light ones because they absorb more heat.
- Harmattan dust settles on a wall within hours. Paint applied over dust bonds to the dust, not the wall.
- Rising damp pushes paint off from the bottom up. No coating fixes this, because the water is coming through the wall itself.
Recognising which one you have matters more than choosing a brand. Blistering near the ground is damp. Chalking across the whole elevation is sun. Peeling in patches under a window is a leak. Each needs a different fix before any paint goes on.
The right coating for the substrate
A standard interior emulsion is the wrong product outside, even if it looks acceptable for a season. Nigerian exteriors need a film that is thicker, more flexible and formulated to take ultraviolet light.
- Rendered and block walls — Prestige Textured Finish. The heavier build bridges hairline cracks and puts more material between the weather and the wall. This is the default for most Nigerian exteriors.
- Feature elevations and entrance walls — Prestige Texalux where a decorative texture is wanted.
- Boundary walls and gatehouses — texture again, because blockwork is rarely rendered flat and a thin paint film shows every irregular course.
- Steel and metal — Prestige Marine Coatings near the coast or on waterside structures; Prestige Premium Plus Gloss on gates and railings inland.
- Timber — gloss, with a primer suited to the species.
Colour is a performance decision
Most people choose exterior colour on appearance alone. In this climate it is also a durability decision. A dark wall absorbs heat, expands more, moves more, and fails sooner than a light one. On a west-facing elevation taking the afternoon sun for five hours, a light colour will outlast a dark one by years, not months.
If you want a strong colour, put it on the entrance elevation facing east or under a canopy, and keep the exposed faces light.
Preparation, in order
- Wash the wall. A pressure washer is fastest, but a brush and water works. Chalking paint and dust both have to go, and the wall must then be allowed to dry completely — a day, not an hour.
- Scrape back anything loose, flaking or blistered to a firm edge. Feather the edge with sandpaper so the repair does not show through the new coat.
- Fix the water. Leaking gutters, cracked render, failed roof flashing, blocked drainage, a tap that runs down the wall. Painting over a leak is the most common waste of money on an exterior.
- Fill cracks. Hairline cracks take Prestige Super Filler. Wider cracks and hollow render need cutting back and repairing with mortar before filling.
- Prime bare patches, repairs and any area that has been scraped back to the substrate.
- Two coats of the chosen coating, on a dry wall, in dry weather, with the first coat fully dry before the second.
The single biggest cause of an exterior failing within a year is painting a wall that is still damp inside. It may feel dry to the touch while holding moisture a centimetre down.
When not to paint
The rainy season is the wrong time for exterior work. Paint needs dry conditions to cure; applied in heavy humidity it skins over, stays soft underneath, and blisters within months. The dry season is the window.
Two other cases where you should stop and fix the building first: rising damp at the base of a wall, and active efflorescence — the white salt deposits that appear as water evaporates out of the masonry. Both are moisture problems. Coating over them is temporary and expensive.
How much material a typical exterior needs
Take a simple bungalow, 15m by 12m, with 2.7m walls and one storey:
- Perimeter is 54m of wall, so about 146 square metres of gross elevation
- Deduct windows and doors — say 20 square metres — leaving roughly 126 square metres
- Texture coatings are typically applied thicker than paint, so coverage per litre is lower. On a 4 square metres per litre figure, one coat takes about 31 litres
- Two coats is roughly 63 litres, before waste
- Add 10 per cent for rough blockwork and the figure is close to 70 litres
Confirm the coverage figure for the actual product, because it varies widely between textures and flat exterior paints. What matters is that you ask the question: litres, and coats. A quote that names neither is a guess.
What the job should include
An exterior quote worth comparing states the coating by name, the litres, the number of coats, the preparation included, the access equipment needed and the number of labour days. Access is the line people forget: single-storey walls are straightforward, but anything above one storey, or a wall behind a fence line, needs a platform or scaffolding and adds days.
Our guide to what painting costs in Nigeria sets out how to compare two quotes on the same basis.
Questions people ask
Can I paint over chalky walls? No. The chalk has to be washed off, or the new coat bonds to powder and does the same thing within a year.
How often should an exterior be repainted? A well-prepared texture coating in a light colour should give several years. A thin emulsion on a dark wall in full sun may look tired in two.
Is texture better than paint outside? For most Nigerian blockwork, yes — the film is thicker, it hides irregularities and it bridges hairline cracks that a flat paint cannot.
Can I paint in the harmattan? Yes, with care. Dust settles fast, so walls need wiping immediately before the coat goes on, and the work has to be planned so the film cures before dust settles on it.
Getting an exterior quoted
Send photographs of each elevation, the height of the building, and whether there is access for a platform. We will tell you the coating, the litres and what the wall needs before painting. Call +234 802 562 5333, message WhatsApp, or send your project details.